CatalogFeatures
- Cartridge-Kit providing cost-efficiency and high usability
- Cartridge-Kit incorporating standardized probe-pins and injection-molded insulators realizing short lead-time (L=5.7 or 3.3mm*)
- Bias-cut structure of probe-pins stabilizing contact resistance
- Crown-shaped plunger ensuring high contact reliability
* Please consult us for details about probe-pins of lengths shorter than 3.3mm.
Product variation
T3P for graphic-recognition handler
T3P for handler
T3P with standard-lid for manual testing
T3P with clam-shell lid for manual testing
Probe-pin Specifications
Probe-pin Specifications (The link will open in another window.)
Product Lineup
| Pin Length (mm) |
Pitch (mm) |
Molded Type | Machined Type*2 | ||
|---|---|---|---|---|---|
| Series | Grid Area | Dimension*1 (mm) |
Series | ||
| L=5.7 | 1.27 | IC449 | 27 | 69x69x10 | IC420 |
| 1.00 | IC450 | 39 | 69x69x10 | IC421 | |
| 0.80 | IC451 | 23 | 37x37x8 | IC422 | |
| 0.65 | IC452 | 25 | 37x37x8 | IC423 | |
| 0.50 | IC453 | 29 | 37x37x8 | IC424 | |
| 0.40 | IC454 | 29 | 37x37x8 | IC425 | |
- *1
- Denotes the dimensions of T3P for handler.
- *2
- Machined products are available upon request.