CN084series

Features

Micro TCA Carrier Hab (MCH) plug connector
• Low insertion/extraction force design allows simultaneous insertion and extraction of 680 pins.
• High-speed transmission characteristics: 12.5 Gbps (when mated with CN080)
• Mating with CN080 enables high-speed transmission at 12.5 Gbps.
• Low insertion and removal force design enables the simultaneous insertion and removal of 680 pins.
Adopted a structure with a step at the plug tip to distribute the peak during insertion in two stages.
The molded produce ensures precise thickness control.
• MCH module thickness conversion of t = 1.6 mm (standard) and t = 2.0 mm are supported (2.0-mm type is under planning).
• Absorbable structure for mounting tolerance between MCH modules.
• A wide variety of combinations provide a high degree of freedom in combination.

Specifications (general performance)

Number of contacts: 170, 340, 510, and 680
Number of insertion and removal times: 200
Differential impedance: 100±10 Ω
Operating temperature range: -55°C to 105°C

Specifications (electrical performance)

Insulation resistance: 100 MΩ or higher at 80 VDC
Withstand voltage: 80 V rms/min.
Conductor wire resistance: 60 mΩ

×

Enter download path

Decision

If you don't know your password, click here